If you are finished with the Scissor Lift, clear all tools, debris, etc., from the platform and plug the Scissor Lift in to recharge the battery.Turn the base key switch to the off position.If painting is being done while on the Scissor Lift, cover up the platform, handrails and controls to minimize overspray or splashing on the Scissor Lift.It can be used in high range in open travel ways, but should be used in low range in tight areas. The Scissor Lift is equipped with a high and low range for travel.Proceed with job using the required buttons, levers and controller located on the operator console.Pull out the emergency stop button on the platform control panel.Select “platform” with off/platform/base select key switch.Pull out the emergency stop button on the control panel.Disconnect battery-charging system from external power source. Make sure the batteries are fully charged.Check for obstacles around the work platform and in the path of travel such as holes, drop offs, debris, ditches and soft fill.FAILURE TO AVOID THE ABOVE HAZARDS MAY RESULT IN SERIOUS INJURY!.If you are working near the orange duct-o-bars by the hoist travel rail, the main switch for the duct-o-bars must be locked out and checked for power by an electrician. When using the Scissor Lift above or near an overhead hoist travel way, the overhead hoist must be locked out.Do not use with tires that are not per manufacturers, specifications.Do not attach ropes or chains to guardrails or use as a crane.Do not use ladder, scaffolding, or other devices to increase size or working height of platform.Do not raise platform while machine is on a truck, forklift, or other device or vehicle.Do not use under the influence of alcohol or drugs.Do not use near moving vehicles or cranes.Do not use if working platform is not working properly or if any part is damaged, worn or missing.Do not raise platform in windy or gusty conditions.Do not use without guardrails, mid rails, chain, or bar in place.Do not drive onto uneven or soft surfaces when elevated.Do not raise platform on uneven or soft surfaces.Do not raise platform on slope or drive onto slope when elevated.Do not drive near drop-offs, holes, or loading docks.The following points must be remembered when operating a Scissor Lift: The purpose of the Scissor Lift work platform: to transport and raise personnel and tools to overhead work areas. It is can be used for the maintenance of maximum height area by person. Therefore proper usage of this work platform is mandatory. RE-113 Specification : Dakshesh self-propelled scissor lift, is a scissor type mechanic structure with high stability. You as a careful is the best insurance against an accident. Use appropriate safety devices to protect your eyes, ears, hands, feet and body. The National Safety Council reminds us that most accidents are caused by the failure of some individuals to follow simple and fundamental safety rules and precautions, common sense dictates the use of protective clothing when working on or near machinery. This work platform does not provide protection from contact with a proximity to an electrically charged conductor.You must allow for platform sway, rock or sag.Maintain safe clearances from electrical power lines and apparatus. Electrocution Hazard: This machine is not insulated.Any person operating the controls of the Scissor lift or occupying the platform must be familiar with these Safety and Operating Procedures.It is wise to consider safety as top priority in any job. Demonstrate respect for facilities and property.Demonstrate excellent work habits, efficiency and reliability.
#Scissor crane lift professional#
Operators will display a professional attitude and will demonstrate the following skills: No one should enter a Danger area once it is roped off. Red DANGER tape is used to ensure no one is to enter the hazardous area where there is greater potential for injury. A person may enter the caution zone with your permission. We can customize any product for any size job.All lift vehicles are should rope off the area in which they are working using either YELLOW caution ribbon or RED danger tape, anytime there is danger that something could be dropped on a person below.Ī Yellow caution ribbon is used to make people aware that there is potential for injury and to take caution. Industrial Man Lifts is your aerial access solution provider. Unit Recharges from Trucks Electrical System.Quick Disconnect System For Easy Removal.Truck Mounted Scissor Lift Specifications: Model The unit is powered by a 12 Volt battery that is re-charged from the trucks electrical system. The unit offers a rear extension platform and the unit offers a quick disconnect system from the truck. The Truck Mounted Scissor Lift is a pickup truck mounted scissor lift.
0 kommentar(er)
